Smok RPM85 Vape Kit

1. Charge the device using the supplied USB Type-C charging cable.
2. Remove the pod from the device.
3. Install the coil by pushing the correct RPM 3 coil firmly into the pod.
4. Open the sliding top-fill cap to access the filling port.
5. Add your e-liquid without overfilling the pod.
6. Close the cap securely after filling.
7. Allow the coil to soak for several minutes before vaping.
8. Attach the pod to the magnetic pod connection.
9. Turn on the device using the firing button.
10. Adjust the wattage and airflow to match your coil and preferred draw.

Pros

• Up to 85W adjustable power
• Large 3000mAh built-in battery
• Adjustable airflow control
• Refillable top-fill pod
• RPM 3 mesh coil support
• Colour TFT display
• USB Type-C charging
• Compact zinc-alloy design

Cons

• 2ml UK pod holds less e-liquid than some international versions
• Low-resistance coils can use e-liquid faster
• Not designed as a simple pre-filled pod device
• Best performance requires choosing the correct coil wattage

Troubleshooting Guide

Device Not Turning On

Check that the battery has enough charge. If the device still does not respond, make sure the charging cable and USB-C charging port are working correctly.

No Vapour

Check that the pod is fitted properly and the coil is installed correctly. Make sure the coil has been soaked with e-liquid before pressing the firing button.

Burnt Taste

A burnt taste can happen when the coil is dry or used outside its recommended wattage. Refill the pod, let the coil soak, and check the wattage range.

Pod Leaking

Remove the pod and check that the coil is pushed fully into place. Also check the fill cap and seals, and avoid overfilling the pod.

Weak Flavour

Try adjusting the airflow and make sure the coil is suitable for your selected wattage. An old coil may also need replacing.

Charging Problem

Check the USB-C cable and charging connection. Clean the charging port carefully if there is visible dirt, and avoid using damaged cables or accessories.