sales@selectvapeclub.co.uk / Call: +44 7715807710
Free Next Day Delivery On Orders Over £25! Dispatch Cut of time from 4PM to 5PM

Innokin Z Replacement Coils (Pack of 5) - £7.99 or 2 For £14

Regular price £7.99 £11.95 | Save £3.96 (33% off)
/
Icon
Order within Calculating...
Icon
For delivery Calculating...
Icon
You could earn 5 reward points

Why Shop With Us?

Free UK Delivery on Orders above £25

Get it Tomorrow - Order Before 5PM

100k+ Verified Product Reviews

Best Vaping Rewards Programme

2214

What are the Innokin Z Replacement Coils?

The Innokin Z Replacement Coils are screw-in coils made for Innokin's Z coil tanks, including the Zenith and Zlide. They are known for smooth flavour and a comfortable draw, and they suit vapers moving on from a basic starter kit. Each pack has five coils of one type, and they fit the Innokin Zenith tank. You can browse more choices in our vape coils range.

There are two Z coils listed on this page. The 0.3 ohm coil gives a looser, warmer draw with more vapour, while the 1.3 ohm coil gives a tighter mouth-to-lung style vape at lower power.

At £7.99 for five, down from £11.95, with multi-buy deals from 2 for £14, these Innokin Z coils are a low cost way to keep your Zenith or Zlide fresh.

Specifications

Product Name

Innokin Z Replacement Coils, sold in a pack of five.

Pack Size

Five screw-in Z coils of one resistance type.

0.3 Ohm

Lower-resistance coil designed for a warmer, looser draw.

1.3 Ohm

Higher-resistance coil designed for a tighter draw at lower power.

Vaping Style

Restricted direct-to-lung vaping with the 0.3 ohm coil and a tighter mouth-to-lung draw with the 1.3 ohm coil.

Best E-Liquid

50/50 e-liquids, with nic salts also suitable for the higher-resistance coil.

Fitting

Screw-in coil design compatible with Innokin Z coil tanks.

Compatible Tanks

Innokin Zenith, Zenith Pro, Zlide and Zlide Top tanks.

Compatible Kits

Innokin Kroma-Z and other kits supplied with a Z coil tank.

Made for Innokin Z Tanks

Made for Innokin Z Tanks

These coils are built for Innokin's Z coil tanks, so they screw in tight and wick well. If you use a Zenith, Zlide or Zlide Top tank, one pack of Innokin Z coils keeps it tasting the way it should.

Two Resistances

Two Resistances

You can choose between 0.3 ohm and 1.3 ohm. The 0.3 ohm gives a warmer, airier vape with more vapour, while the 1.3 ohm stays cooler and tighter, so you can pick the style that feels right for you.

Warmer 0.3 Ohm Coil

Warmer 0.3 Ohm Coil

The 0.3 ohm coil is the lower resistance option. It gives a fuller, warmer restricted lung draw with more vapour, and suits vapers who want a bit more from their Zenith than a classic tight MTL vape.

Tighter 1.3 Ohm Coil

Tighter 1.3 Ohm Coil

The 1.3 ohm coil runs at lower power with a tighter draw. It suits 50/50 e-liquids and nic salt e-liquids, giving a smooth, discreet hit that is easy on battery life.

Smooth Innokin Flavour

Smooth Innokin Flavour

Innokin built the Z coil range around clean, consistent flavour. The coil design keeps the cotton evenly fed, so your e-liquid tastes full and smooth from a fresh tank right down to the last few drops.

Easy Screw-In Changes

Easy Screw-In Changes

Each coil screws into the base by hand, with no tools needed. Unscrew the old coil, prime the new one, screw it in and fill up, so swapping coils on your Zenith only takes a few minutes.

Available Options

0.3 Ohm

The lower-resistance option, delivering a warmer and looser draw with increased vapour production and fuller flavour. It works well with 50/50 or slightly higher-VG e-liquids. Start at a low wattage and gradually increase the power.

1.3 Ohm

A higher-resistance coil that provides a tighter, cooler draw at low power. It is suitable for 50/50 e-liquids and nic salts. Start at a low wattage and check the coil itself for its exact recommended power range.

What's in the Box?

  • 5 x Innokin Z Replacement Coils in your chosen resistance

Need a new tank? Take a look at our vape tanks range.

What's in the box

Pricing and Offers

  • Innokin Z Replacement Coils are just £7.99 for a pack of five, down from £11.95
  • That is a saving of £3.96, or 33% off the regular price
  • Each coil works out at about £1.60
  • Buy 2 packs for £14, which works out at £7.00 per pack, or £1.40 per coil
  • Buy 3 packs for £20, which works out at about £6.67 per pack, or about £1.33 per coil
  • Buy 4 packs for £25, which works out at about £6.25 per pack, or just £1.25 per coil
  • Multi-buy savings are applied automatically at checkout
  • Free next day UK delivery on orders over £25
  • Find more money-saving deals in our clearance section
  • For adult use only. Please vape responsibly and follow UK vaping rules

Compatible Devices

Innokin Z coils are widely listed as compatible with:

  • Innokin Zenith tank
  • Innokin Zlide tank
  • Innokin Zlide Top tank
  • Innokin Kroma-Z and other kits supplied with a Z coil tank

Please check your tank before ordering. Looking for a different resistance? See our Innokin Zenith 0.8 ohm coils.

How to Use Innokin Z Coils

1

Empty the Tank

Remove the tank from your device, unscrew the base and pour away any remaining e-liquid.

2

Remove the Old Coil

Unscrew the used coil from the base by hand and dispose of it safely.

3

Prime the New Coil

Drip a few drops of e-liquid onto the cotton through the side holes and into the top of the coil.

4

Screw In the New Coil

Screw the fresh coil into the base until snug, then refit the base to the tank.

5

Fill and Wait

Fill the tank with e-liquid and leave the coil to soak for five to ten minutes so the cotton is fully saturated.

6

Set Your Power

Start at a low wattage and gradually increase the power until the flavour and warmth feel right for you.

Pros and Cons

Pros

  • Fits the Innokin Zenith, Zlide and Zlide Top tanks
  • Two options, from a warmer 0.3 ohm to a tighter 1.3 ohm
  • Smooth, clean flavour that stays steady through the tank
  • Simple screw-in design makes coil changes quick and easy
  • £7.99 for five, down to about £1.25 per coil on multi-buy

Cons

  • Only two resistances are listed on this page
  • Does not fit Innokin Endura or other non-Z tanks
  • Not made for very high power cloud vaping

Who Is This For?

  • Innokin Zenith and Zlide tank owners.
  • Kroma-Z kit users who need fresh coils.
  • Vapers moving on from a basic starter kit.
  • Nic salt and 50/50 vapers who want smooth flavour.

Looking for a full new set up? Compare options in our vape kits range.

Troubleshooting

Burnt Taste on a New Coil

The coil was not primed or the power is too high. Prime the cotton, let it soak for ten minutes and start at a lower wattage.

Gurgling or Spitting

Too much e-liquid has entered the coil. Remove the tank, wrap a tissue round the mouthpiece and blow gently to clear it.

Leaking From the Base

The coil may be loose or the seal worn. Tighten the coil by hand, check the O-rings and close the airflow when filling.

Weak Flavour or Vapour

The coil may be worn or the power is too low. Turn the wattage up slowly, or fit a fresh Innokin Z coil from your pack of five.

Dry Hits on Long Puffs

The coil cannot wick fast enough. Take shorter puffs and use a thinner liquid, such as our 50/50 10ml e-liquids.

Frequently Asked Questions

They are widely listed for the Innokin Zenith, Zlide and Zlide Top tanks. Kits such as the Kroma-Z that come with one of these tanks also take Z coils, so please check your tank first.

Yes, the Kroma-Z kit is supplied with a Z coil tank, so these coils fit it. Choose the 0.3 ohm for a warmer, looser draw or the 1.3 ohm for a tighter vape at lower power.

The Innokin Zenith uses Z coils, like the ones in this pack. These coils screw into the base of the tank and come in different resistances to suit both MTL and restricted lung vaping.

The Zlide is a smaller, slimmer tank with a slide-to-fill top, while the Zenith is a little larger. Both use the same Innokin Z coils, so one pack works in either tank.

The Zenith 2 is listed with Z coils too, but some versions ship with different coil options. Please check the coil type printed on your Zenith 2 before ordering this pack.

Start at a low wattage and turn up slowly. The 0.3 ohm coil will need more power than the 1.3 ohm coil, so check the coil itself for its exact recommended power range before vaping.

The 1.3 ohm coil is better suited to nic salts, as it runs at lower power with a tighter draw. For the 0.3 ohm coil, a lower strength 50/50 freebase e-liquid will feel smoother.

Most Z coils last around two weeks. Coil life depends on your wattage, how often you vape and your e-liquid, as very sweet liquids tend to clog the cotton more quickly than plain flavours.

No, the Endura range uses its own coils. If you have an Endura T18E or T18 II, see our Innokin T18E coils instead.

Change the coil when the flavour fades, tastes burnt, or you notice gurgling and less vapour. Keeping spares from your pack of five ready means you never vape on a tired coil.

Why Choose Select Vape Club

  • FREE UK DELIVERY

    When you spend £25

  • UNBEATABLE PRICES

    Explore our more vape deals

  • SECURED PAYMENTS

    We accept all major credit cards.

  • 7 DAYS ONLINE SUPPORT

    We available via whatsapp chat

Special instructions for seller
Add A Coupon

What are you looking for?


Popular Searches: hayati pro max  crystal pro cp 10k  elux legend salt  vaporesso pods  xlim kits  hayati pro ultra  

GET 10% OFF YOUR ORDER

Sign up and unlock your instant discount.

WhatsApp