sales@selectvapeclub.co.uk / Call: +44 7715807710
Free Next Day Delivery On Orders Over £25! Dispatch Cut of time from 4PM to 5PM

Vaporesso GTI Replacement Coils (Pack of 5) - £9.99 or 2 For £19

Regular price £9.99 | Save £-9.99 (Liquid error (sections/product-template line 263): divided by 0% off)
/
Icon
Order within Calculating...
Icon
For delivery Calculating...
Icon
You could earn 5 reward points

Why Shop With Us?

Free UK Delivery on Orders above £25

Get it Tomorrow - Order Before 5PM

100k+ Verified Product Reviews

Best Vaping Rewards Programme

899396

What are the Vaporesso GTI Replacement Coils?

The Vaporesso GTI Replacement Coils are push-fit mesh coils made for the Vaporesso iTank and iTank 2. Each pack holds five coils of one type, and they are built for big flavour and smooth clouds at sub-ohm power. You can browse more choices in our vape coils range.

There are six GTI coils to pick from. The 0.15 ohm and 0.2 ohm coils are made for high power cloud vaping, the 0.4 ohm and 0.5 ohm coils give a calmer direct lung vape, and the two Dual Mesh coils at 0.2 ohm and 0.4 ohm add extra heating surface for fuller flavour.

At £9.99 for five, with multi-buy deals from 2 for £19, these Vaporesso GTI coils keep your iTank fresh without costing much.

Specifications

Product Name

Vaporesso GTI Replacement Coils, available in a pack of five.

Pack Size

Five push-fit GTI mesh coils of one resistance type.

0.15 Ohm

High-power mesh coil, designed for 75W to 90W operation.

0.2 Ohm

Cloud-focused mesh coil, designed for 60W to 75W operation.

0.4 Ohm

Lower-power mesh coil, designed for 50W to 60W operation.

0.5 Ohm

Higher-resistance mesh coil, offering a calmer direct lung vaping experience.

Dual Mesh 0.2 and 0.4 Ohm

Dual mesh coils featuring a larger heating surface for consistent heating.

Fitting

Push-fit design that slots securely into the tank base.

Compatible Tank

Vaporesso iTank and iTank 2.

Made for the iTank Range

Made for the iTank Range

GTI coils are built for the Vaporesso iTank and iTank 2, giving a tight fit and steady wicking. If your kit came with one of these tanks, a pack of GTI coils keeps it tasting the way it did when it was new.

Six Coils to Choose From

Six Coils to Choose From

With six options from 0.15 ohm up to 0.5 ohm, including two dual mesh coils, you can set up your tank just how you like it. Go low for warm, thick clouds, or go higher for a cooler and lighter direct lung vape.

Mesh Heating for Flavour

Mesh Heating for Flavour

Every GTI coil uses Vaporesso's mesh design, which heats evenly across a wide surface. This means fast ramp-up, fewer dry spots and bright, clean flavour, whether you vape fruit, menthol or rich dessert e-liquids.

Dual Mesh for Extra Taste

Dual Mesh for Extra Taste

The Dual Mesh 0.2 ohm and 0.4 ohm coils use two mesh strips for a bigger heating area. They give a fuller, richer taste and dense vapour, which makes them a great pick for flavour chasers on the iTank 2.

High Power Cloud Coils

High Power Cloud Coils

The 0.15 ohm and 0.2 ohm coils are made for 60W to 90W. They turn high VG e-liquid into big, warm clouds, so they suit vapers running a strong mod and wanting a full, satisfying direct lung hit.

Push-Fit Design

Push-Fit Design

GTI coils push into the base of the tank with no threads to line up. Pull the old coil out, push a primed new coil in and refit the base, so changing coils on your iTank takes just a minute or two.

Available Options

0.15 Ohm

High-power mesh coil designed for 75W to 90W operation, delivering warm vapour and bold flavour.

0.2 Ohm

Mesh coil designed for 60W to 75W operation, providing dense clouds and rich flavour with balanced power consumption.

0.4 Ohm

Mesh coil designed for 50W to 60W operation, offering cooler vapour, lighter clouds and clean flavour.

0.5 Ohm

Higher-resistance mesh coil designed for a calmer direct lung vaping experience at lower power.

Dual Mesh 0.2 Ohm

Dual mesh coil featuring a larger heating surface for fuller flavour and dense vapour production.

Dual Mesh 0.4 Ohm

Higher-resistance dual mesh coil offering rich flavour with smoother vapour and lighter clouds.

What's in the Box?

  • 5 x Vaporesso GTI Replacement Coils in your chosen resistance

Looking for a new device? See our Vaporesso vape kits range.

What's in the box

Pricing and Offers

  • Vaporesso GTI Replacement Coils are just £9.99 for a pack of five
  • Each coil works out at about £2.00
  • Buy 2 packs for £19, which works out at £9.50 per pack, or about £1.90 per coil
  • Buy 3 packs for £28, which works out at about £9.33 per pack, or about £1.87 per coil
  • Buy 4 packs for £36, which works out at £9.00 per pack, or just £1.80 per coil
  • Multi-buy savings are applied automatically at checkout
  • Free next day UK delivery on orders over £25
  • Find more money-saving deals in our clearance section
  • For adult use only. Please vape responsibly and follow UK vaping rules

Compatible Devices

Vaporesso GTI coils are widely listed as compatible with:

  • Vaporesso iTank
  • Vaporesso iTank 2
  • Vaporesso Target 100 and Target 200 kits with the iTank
  • Vaporesso Gen 200 and Gen 80S kits with the iTank 2

Please check your tank before ordering. Vaporesso pod and Luxe style kits often use Vaporesso GTX V2 coils instead.

How to Use Vaporesso GTI Coils

1

1. Empty the Tank

Remove the tank from your mod, unscrew the base and empty any remaining e-liquid.

2

2. Remove the Old Coil

Pull the used GTI coil straight out of the tank base, as it features a push-fit design.

3

3. Prime the New Coil

Apply a few drops of e-liquid to the cotton through the juice holes and the top of the coil.

4

4. Install the New Coil

Push the replacement coil firmly into the base and screw the base back onto the tank.

5

5. Fill and Wait

Fill the tank with e-liquid and allow the coil to soak for five to ten minutes.

6

6. Set Your Wattage

Reattach the tank, start at the lower end of the coil's recommended wattage range and adjust according to its specifications.

7

UK TPD Compliance

Ensure your tank and e-liquid comply with applicable UK Tobacco Products Directive (TPD) regulations.

Pros and Cons

Pros

  • Six coils, including two dual mesh options for extra flavour
  • Mesh heating gives bright, clean taste with fewer dry spots
  • Push-fit design makes coil changes quick and simple
  • Fits the iTank and iTank 2 on many Vaporesso kits
  • £9.99 for five, down to about £1.80 per coil on multi-buy

Cons

  • Only fits the iTank range, not GTX pod or Luxe kits
  • Low ohm coils need a strong mod and use more e-liquid
  • Not every option has a published wattage range

Who Is This For?

  • Vaporesso iTank and iTank 2 owners who need new coils.
  • Target 100, Target 200 and Gen 200 kit users.
  • Cloud vapers who vape high VG at 50W to 90W.
  • Flavour fans who want to try dual mesh coils.

Want a bigger device for your tank? Compare our vape box mods.

Troubleshooting

Burnt Taste on a New Coil

The coil was not primed or the power is too high. Prime the cotton, let it soak for five to ten minutes and lower the wattage.

Gurgling or Spitting

Too much e-liquid has flooded the coil. Take the tank off, tap out the excess and open the airflow a little more when vaping.

Leaking From the Base

The coil may not be pushed in fully. Pull it out, check the seals, push it back in firmly and avoid overfilling the tank.

Weak Flavour or Vapour

The coil may be worn or the power is too low. Turn the wattage up slowly within the range, or fit a fresh GTI coil from your pack.

Harsh Hit on Low Ohm Coils

Nicotine is too strong for a cloud coil. Use low strength high VG liquid, such as our 100ml shortfills.

Frequently Asked Questions

GTI coils are made for the Vaporesso iTank and iTank 2. These tanks come with kits such as the Target 100, Target 200, Gen 200 and Gen 80S, so please check your tank before ordering.

Yes, the Vaporesso iTank 2 uses GTI coils. Choose the 0.15 or 0.2 ohm for big clouds, or the 0.4 ohm for a lighter vape, then prime the coil well before you start vaping.

The iTank T is a different tank and does not use the same coils as the iTank 2. GTI coils are made for the iTank and iTank 2, so check the name on your tank before you order.

No, GTI and GTX coils are different. GTI coils fit the iTank range, while GTX coils fit Vaporesso pod kits, Luxe and Gen Nano devices. They are not interchangeable, so pick the type your device uses.

The Dual Mesh 0.2 ohm and 0.4 ohm coils give a fuller taste thanks to their larger mesh surface. The single mesh 0.2 ohm is also a great all-round choice for flavour and vapour.

The 0.15 ohm runs best from 75W to 90W, the 0.2 ohm from 60W to 75W and the 0.4 ohm from 50W to 60W. For the 0.5 ohm and dual mesh coils, start low and check the coil for its range.

Most GTI coils last around one to two weeks. Coil life depends on your wattage, how often you vape and your e-liquid, as sweet liquids and very high power can wear coils out more quickly.

High VG e-liquids work best in these sub-ohm coils. Our 50ml shortfills are a good match, mixed with a nic shot to a low nicotine strength for a smooth hit.

We do not suggest it. GTI coils produce a lot of vapour, so strong nic salts would feel very harsh. Use a high VG shortfill with a nicotine shot for a gentler mix.

Change the coil when the flavour fades, tastes burnt, or you notice gurgling and less vapour. A fresh coil brings back full flavour, so keep a spare from your pack of five close by.

Why Choose Select Vape Club

  • FREE UK DELIVERY

    When you spend £25

  • UNBEATABLE PRICES

    Explore our more vape deals

  • SECURED PAYMENTS

    We accept all major credit cards.

  • 7 DAYS ONLINE SUPPORT

    We available via whatsapp chat

Special instructions for seller
Add A Coupon

What are you looking for?


Popular Searches: hayati pro max  crystal pro cp 10k  elux legend salt  vaporesso pods  xlim kits  hayati pro ultra  

GET 10% OFF YOUR ORDER

Sign up and unlock your instant discount.

WhatsApp