sales@selectvapeclub.co.uk / Call: +44 7715807710
Free Next Day Delivery On Orders Over £25! Dispatch Cut of time from 4PM to 5PM

Voopoo TPP DM Replacement Coils (Pack of 3) - £6.99 or 2 For £13

Regular price £6.99 | Save £-6.99 (Liquid error (sections/product-template line 263): divided by 0% off)
/
Icon
Order within Calculating...
Icon
For delivery Calculating...
Icon
You could earn 5 reward points

Why Shop With Us?

Free UK Delivery on Orders above £25

Get it Tomorrow - Order Before 5PM

100k+ Verified Product Reviews

Best Vaping Rewards Programme

505050

What are the Voopoo TPP DM Replacement Coils?

The Voopoo TPP DM Replacement Coils are push-fit mesh coils made for Voopoo's TPP pod tanks. Each pack has three coils of one type, and they slot straight into the base of the TPP pod for rich flavour and thick clouds. They are the stock coils for the Voopoo Drag 3 box mod, and you can see more options in our vape coils range.

There are three TPP coils to choose from. The 0.15 ohm and 0.2 ohm DM mesh coils are built for direct lung vaping with big vapour, while the 1.25 ohm coil gives a tighter, lower power draw for vapers who want a more discreet vape.

At £6.99 for three, with multi-buy deals from 2 for £13, these Voopoo TPP coils are a low cost way to keep your Drag 3 or Drag X Pro tasting fresh.

Specifications

Product Name

Voopoo TPP DM Replacement Coils, sold in a pack of three.

Pack Size

Three push-fit TPP coils of one type.

0.15 Ohm

DM mesh coil, best used between 60W and 80W.

0.2 Ohm

DM mesh coil, best used between 40W and 60W.

1.25 Ohm

Higher-resistance coil designed for a tighter draw at lower power.

Vaping Style

Direct lung vaping with dense clouds, plus a tighter option with the 1.25 Ohm coil.

Fitting

Push-fit coil that slots into the TPP pod base.

Compatible Pods

Voopoo TPP and TPP-X pod tanks.

Compatible Kits

Drag 3, Drag X Pro, Drag S Pro and Drag X Plus with TPP compatibility.

Made for TPP Pod Tanks

Made for TPP Pod Tanks

These coils are built for Voopoo's TPP and TPP-X pod tanks, so they fit snugly and wick well. If your Drag kit runs a TPP pod, one pack keeps it vaping just as smoothly as the day you first unboxed it.

Dual Mesh Design

Dual Mesh Design

The DM in the name stands for dual mesh. Two mesh strips heat across a wider surface, which gives faster ramp-up, fewer hot spots and fuller flavour, so your e-liquid tastes rich and clean on every pull.

Big Clouds at 0.15 Ohm

Big Clouds at 0.15 Ohm

The 0.15 ohm TPP coil runs best from 60W to 80W. It turns high VG e-liquid into dense, warm vapour, which makes it ideal for cloud chasers using the Drag 3 or another strong Voopoo mod.

Balanced 0.2 Ohm Coil

Balanced 0.2 Ohm Coil

The 0.2 ohm TPP coil runs best from 40W to 60W. It still gives big clouds and full flavour, but at a lower power, so it is a little easier on battery life and e-liquid through a long day.

Tighter 1.25 Ohm Option

Tighter 1.25 Ohm Option

The 1.25 ohm coil gives a tighter and cooler draw at low power. It suits vapers who want a more discreet vape from their TPP pod, so start at a low wattage and turn up slowly to find the right feel.

Push-Fit Changes

Push-Fit Changes

TPP coils push into the base of the pod with no threads to line up. Pull the old one out, push a primed new one in, fill up and you are ready to go, which makes coil changes quick and mess-free.

Available Options

0.15 Ohm

The lowest resistance in the range, designed for direct lung vaping between 60W and 80W. Produces large, warm clouds and bold flavour, working best with high-VG shortfills and low nicotine strengths on a powerful mod.

0.2 Ohm

Best used between 40W and 60W, delivering dense clouds and rich flavour at lower power than the 0.15 Ohm coil. A popular all-round option that is slightly gentler on battery life and e-liquid consumption throughout the day.

1.25 Ohm

A higher-resistance coil designed for a tighter, cooler draw at low power. Ideal for vapers who prefer a more discreet vaping experience. Start at a low wattage and check the coil itself for its exact recommended power range.

What's in the Box?

  • 3 x Voopoo TPP DM Replacement Coils in your chosen resistance

Need a full tank instead? See our vape tanks range.

What's in the box

Pricing and Offers

  • Voopoo TPP DM Replacement Coils are just £6.99 for a pack of three
  • Each coil works out at about £2.33
  • Buy 2 packs for £13, which works out at £6.50 per pack, or about £2.17 per coil
  • Buy 3 packs for £18, which works out at £6.00 per pack, or £2.00 per coil
  • Buy 4 packs for £22, which works out at £5.50 per pack, or just £1.83 per coil
  • Multi-buy savings are applied automatically at checkout
  • Free next day UK delivery on orders over £25
  • Find more money-saving deals in our clearance section
  • For adult use only. Please vape responsibly and follow UK vaping rules

Compatible Devices

Voopoo TPP coils are widely listed as compatible with:

  • Voopoo TPP and TPP-X pod tanks
  • Voopoo Drag 3
  • Voopoo Drag X Pro and Drag S Pro
  • Voopoo Drag X Plus, when used with a TPP pod

Please check your pod before ordering. Older Drag X and Drag S pods use Voopoo PnP coils instead, and you can find more pods in our Voopoo pods range.

How to Use Voopoo TPP Coils

1

Remove the Pod

Take the TPP pod off your device and empty out any remaining e-liquid.

2

Remove the Old Coil

Firmly pull the used coil straight out of the base of the pod.

3

Prime the New Coil

Add a few drops of e-liquid onto the cotton through the side holes and into the top of the coil.

4

Install the New Coil

Push the fresh coil firmly into the base of the pod until it is fully seated.

5

Fill and Wait

Fill the pod with e-liquid and leave the coil to soak for five to ten minutes to allow the cotton to become fully saturated.

6

Set Your Wattage

Refit the pod, start at the lower end of your coil's recommended wattage range and gradually increase the power to your preferred setting.

7

TPD Compliance

Use your coils in accordance with UK TPD compliance rules for tanks and e-liquids.

Pros and Cons

Pros

  • Dual mesh coils give rich flavour and thick, warm clouds
  • Push-fit design, so changing coils takes only seconds
  • Fits the Drag 3, Drag X Pro, Drag S Pro and TPP pods
  • Three resistances, including a tighter 1.25 ohm option
  • £6.99 for three, down to about £1.83 per coil on multi-buy

Cons

  • Only three coils per pack, fewer than most PnP packs
  • Does not fit PnP pods used on the original Drag X
  • Low ohm coils use more e-liquid at high power settings

Who Is This For?

  • Voopoo Drag 3 owners who need fresh TPP coils.
  • Drag X Pro and Drag S Pro users with a TPP pod.
  • Cloud vapers who use high VG at 40W to 80W.
  • Vapers who want a single coil type for several Drag kits.

Looking for a new setup? Compare options in our vape kits range.

Troubleshooting

Burnt Taste on a New Coil

The coil was not primed or the power is too high. Prime the cotton, let it soak for five to ten minutes and lower the wattage.

Gurgling or Spitting

Too much e-liquid has flooded the coil. Remove the pod, blow gently through the mouthpiece and open the airflow a little more.

Leaking From the Pod

The coil may not be pushed in fully. Remove it, check the seal, push it firmly back in and avoid overfilling the TPP pod.

Weak Flavour or Vapour

The coil may be worn or the power is too low. Turn the wattage up slowly within the range, or fit a fresh TPP coil from your pack.

Harsh Hit on Low Ohm Coils

Nicotine is too strong for a cloud coil. Use low strength high VG liquid, such as our 100ml shortfills.

Frequently Asked Questions

They are widely listed for Voopoo TPP and TPP-X pod tanks, which are used on the Drag 3, Drag X Pro and Drag S Pro. The Drag X Plus also takes them when you use it with a TPP pod.

Yes, the Voopoo Drag 3 uses the TPP pod tank and these TPP coils. Pick the 0.15 ohm for the biggest clouds or the 0.2 ohm for a balanced vape at lower power.

TPP coils fit Voopoo's TPP pod tanks, while PnP coils fit the PnP pods used on the original Drag X, Drag S and Vinci. They are not interchangeable, so choose the type your pod uses.

Yes, the Drag X Pro comes with a TPP pod, so these coils fit. If you switch your Drag X Pro to a PnP pod, you will need PnP coils for that pod instead.

Yes, the Voopoo Drag S Pro uses the same TPP pod as the Drag X Pro. Choose the coil that suits your style and set the wattage inside its recommended power range.

The 0.15 ohm coil runs best from 60W to 80W and the 0.2 ohm from 40W to 60W. The 1.25 ohm coil needs much lower power, so start low and turn up slowly.

The 1.25 ohm coil runs at lower power, so it is better suited to nic salt e-liquids than the cloud coils. Keep the wattage low and start with a lower nicotine strength.

Most TPP coils last around one to two weeks. Coil life depends on your wattage, how often you vape and your e-liquid, as sweet liquids and very high power can wear them out sooner.

No, they only fit devices that use a TPP or TPP-X pod. Many newer Voopoo kits use PnP X coils, so check the pod name printed on your device before you order.

Change the coil when the flavour fades, tastes burnt, or you notice gurgling and less vapour. A fresh coil brings back full flavour, so keep a spare from your pack of three ready.

Why Choose Select Vape Club

  • FREE UK DELIVERY

    When you spend £25

  • UNBEATABLE PRICES

    Explore our more vape deals

  • SECURED PAYMENTS

    We accept all major credit cards.

  • 7 DAYS ONLINE SUPPORT

    We available via whatsapp chat

Special instructions for seller
Add A Coupon

What are you looking for?


Popular Searches: hayati pro max  crystal pro cp 10k  elux legend salt  vaporesso pods  xlim kits  hayati pro ultra  

GET 10% OFF YOUR ORDER

Sign up and unlock your instant discount.

WhatsApp