OBS Engine Vape Kit

Name: OBS Engine VapeKit
Brand: OBS
Price: 15.99 GBP
Availability: InStock

By OBS

Regular price £15.99

COLOURS

Quantity

Order within Calculating...

For delivery Calculating...

You could earn 5 reward points

Why Shop With Us?

Free UK Delivery on Orders above £25

Get it Tomorrow - Order Before 5PM

100k+ Verified Product Reviews

Best Vaping Rewards Programme

Vaporesso Target 200 Vape Kit
£28.00

Voopoo Vinci Pod SE Kit
£18.99

What Is OBS Engine 100W Starter Vape Kit?

The OBS Engine 100W Starter Kit is a refillable vape setup made for adult users who enjoy direct lung vaping. It brings together the Engine 100W mod and the Engine S Tank in one easy-to-use setup.

This OBS Engine 100W Vape gives you a 5W to 100W power range, so you can change the wattage to match your coil and vaping style. It works well as a sub ohm kit and is mainly built for a smooth DTL draw.

The OBS Engine mod kit uses one removable battery. You can use a 18650, 20700, or 21700 battery. An 18650 battery adaptor is included, but the battery itself must be bought separately.

With mesh coils, adjustable airflow, Type-C charging, and a clear screen, this OBS Engine 100 Watt Kit gives you simple control without making the device hard to use.

Specifications

Feature	Details
Product	OBS Engine 100W Starter Kit
Device Type	Regulated single-cell vape mod with refillable sub-ohm tank
Power Range	Adjustable 5W to 100W power range
Maximum Output	Maximum 100W output
Battery Support	Single 18650, 20700, or 21700 battery
Battery Included	No, external battery cell is sold separately
Battery Adaptor	18650 battery adaptor included
Tank	Engine S Tank
UK Tank Capacity	2ml refillable vape tank
Coil Series	E Mesh coil series
E1 Coil	0.4 ohm resistance, recommended around 45–55W
E2 Coil	0.2 ohm resistance, recommended around 50–70W
Charging	USB Type-C port with 2A charging
Display	0.96-inch LED screen
Airflow	Adjustable airflow ring
Connection	Standard 510 connection
Battery Design	Removable battery design with replaceable battery sleeve
Style	Compact vape mod for DTL and sub-ohm vaping

5W to 100W Adjustable Power

The Engine 100W vape kit gives you a wide power range from 5W to 100W. You can raise or lower the wattage using the simple controls, making it easier to match the power with your chosen coil.

Works With Three Battery Sizes

This OBS Engine kit with external battery supports one 18650, 20700, or 21700 cell. The supplied 18650 battery adaptor gives you more choice, while the removable battery design makes changing batteries simple.

Engine S Tank for Direct Lung Vaping

The included Engine S Tank is made for sub-ohm vaping and a direct lung inhale. Its 2ml UK capacity works with the E Mesh coil series and makes the kit suitable for adult DTL users.

E1 and E2 Mesh Coils Included

The OBS Engine 100W mesh coil starter kit includes an E1 0.4 ohm mesh coil and an E2 0.2 ohm mesh coil. The mesh heating element helps provide steady vapour production and clear flavour delivery.

Adjustable Airflow Control

The Engine S Tank has an adjustable airflow ring at the base. You can open or close the airflow to change how loose the DTL draw feels, giving you more control over each inhale.

Clear 0.96-Inch LED Screen

A 0.96-inch LED screen shows useful details such as wattage, battery level, and other device information. The clear display and simple buttons help make power adjustment quick and easy during everyday use.

Available Colours

SS / Purple Puzzle

Silver body with a bright purple patterned sleeve, giving the device a colourful style while keeping the main finish clean.

Gunmetal / Carbon Fiber

Dark gunmetal body with a carbon-style sleeve, creating a modern and understated appearance.

Gunmetal / Forest Green

Dark metal frame paired with a deep green sleeve for a strong yet balanced colour combination.

Gunmetal / Purple Puzzle

Dark gunmetal frame with a bright purple patterned sleeve, adding colour while maintaining a subtle body finish.

SS / Carbon Fibre

Silver frame with a dark carbon-style sleeve, combining light and dark finishes for a neat modern look.

SS / Forest Green

Silver body with a deep green sleeve, offering a clean finish with a touch of colour.

SS / Ruby Red

Bright silver frame paired with a bold red sleeve, creating a strong colour contrast.

What's in the Box?

1 × OBS Engine 100W Mod
1 × Engine S Tank 2ml
1 × E1 0.4Ω Mesh Coil
1 × E2 0.2Ω Mesh Coil
1 × 18650 Battery Adaptor
1 × Spare Glass Tube
1 × Pack of Spare O-Rings
1 × USB Type-C Cable
1 × User Manual
1 × Warranty Card
1 × Warning Card
Battery not included

Why Choose OBS Engine 100W Starter Vape Kit?

The OBS Engine vaping kit gives you adjustable power, removable battery support, mesh coils, and airflow control in one setup. It is a useful choice for adult users moving toward a stronger DTL vape.

As an OBS Engine DTL kit, it is made for a direct lung inhale rather than a tight mouth-to-lung draw. The Engine S Tank and low-resistance coils work together for sub-ohm vaping.

The OBS Engine 100W single battery mod also gives you more battery choice. It supports a single 21700 battery, single 20700 battery, or single 18650 battery with the included adaptor.

This makes the kit useful for anyone looking for a removable battery vape kit UK option or an external battery sub ohm vape setup.

The OBS Engine variable wattage vape device also lets you control power from 5W to 100W. This gives you more control than fixed-power devices.

For UK buyers searching for a DTL vape kit UK, mesh coil vape kit UK, or 21700 battery vape mod UK, the OBS Engine gives you a mix of power and simple daily use.

The OBS Engine vape price UK and OBS Engine 100W price can change between stores, so always check the live product page before buying.

How to Use OBS Engine 100W Starter Vape Kit

Remove Battery Cover

Remove the battery cover from the device.

Insert Battery

Insert one suitable 18650, 20700, or 21700 battery in the correct direction.

18650 Battery Adaptor

If using an 18650 battery, place it inside the supplied battery adaptor before installation.

Install Coil

Fit either the E1 or E2 mesh coil into the Engine S Tank.

Prime Coil

Apply a few drops of e-liquid directly onto the cotton of a new coil before fitting it.

Fill Tank

Open the top of the tank and fill it through the designated e-liquid filling slot.

Avoid Centre Tube

Do not pour e-liquid into the central airflow tube.

Allow Coil to Saturate

Close the tank and leave the new coil for several minutes to allow the cotton to fully absorb the e-liquid.

Connect Tank

Attach the Engine S Tank to the mod using the standard 510 connection.

Power On

Turn on the OBS Engine vaping device and check the display.

Set Wattage

Adjust the wattage to a suitable level for the installed coil, following the coil's recommended range.

Adjust Airflow

Rotate the adjustable airflow ring until the draw feels comfortable.

Maintain E-Liquid Level

Keep sufficient e-liquid in the tank to ensure the coil openings remain covered.

Replace Coil

Replace the coil when the flavour becomes weak, vapour production decreases, or a burnt taste develops.

Pros and Cons

Pros

Adjustable 5W to 100W output
Works with three common battery sizes
18650 battery adaptor included
Supports 21700 battery use
Replaceable battery design
Engine S sub-ohm tank included
E1 and E2 mesh coils supplied
Adjustable airflow control
Simple top-fill tank
USB Type-C charging
Clear 0.96-inch display
Suitable for DTL vaping
Compact body for a 100W mod
Replaceable battery sleeve

Cons

Battery must be bought separately
Mainly designed for DTL users
Not suited to a tight MTL draw
UK tank capacity is limited to 2ml
Replacement coils need to be bought over time
Battery safety knowledge is needed for removable cells

Troubleshooting Guide

Device Will Not Switch On

Check that the battery has enough charge and is fitted the correct way. Make sure the battery cover is closed properly. If using a 18650 cell, check that the battery adaptor is fitted correctly.

Tank Is Leaking

Remove the tank and make sure the coil is fitted tightly. Check the glass and O-rings for damage. Avoid overfilling, and make sure both the top cap and tank base are closed properly.

Vape Tastes Burnt

Stop using the coil if you notice a burnt taste. Check that the coil has enough e-liquid and that the wattage is not too high. A badly burnt coil should be replaced.

Vapour Feels Too Weak

Check the battery level, wattage, coil condition, and airflow settings. If the coil is old, a fresh replacement coil may improve vapour production and flavour delivery.

Device Cannot Read the Coil

Remove the tank and check the coil installation. Clean the contact points and 510 connection if needed. Fit the tank again and try a new coil if the problem continues.

Battery Runs Down Quickly

Higher wattage uses more battery power. Lower the power if your coil allows it and make sure the battery is in good condition. Old or damaged batteries should not be used.

Type-C Charging Is Not Working

Try another suitable USB Type-C cable and power source. Check the charging port for dirt or damage. Stop charging if the device or battery becomes unusually hot.

Frequently Asked Questions

1. What batteries work with the OBS Engine 100W?

The OBS Engine works with one 18650, 20700, or 21700 battery. An 18650 battery adaptor comes in the box, giving users more choice when selecting a suitable removable battery for the device.

2. Does the OBS Engine 100W include a battery?

No. The kit does not normally include an external battery cell. You will need to buy a suitable 18650, 20700, or 21700 battery separately before using the OBS Engine mod.

3. Which coils fit the OBS Engine S Tank?

The Engine S Tank uses E Mesh coil series heads. The kit includes an E1 mesh coil with 0.4 ohm resistance and an E2 mesh coil with 0.2 ohm resistance.

4. What wattage should I use with the E1 coil?

The E1 0.4 ohm mesh coil has a recommended range of about 45–55W. Start near the lower part of the range, then slowly adjust the wattage until the draw feels right.

5. What wattage should I use with the E2 coil?

The E2 mesh coil has a 0.2 ohm resistance and works around 50–70W. Starting lower in the range can help you find a comfortable balance between flavour, warmth, and vapour.

6. Is the OBS Engine 100W suitable for DTL vaping?

Yes. The OBS Engine 100 watt DTL vaping kit is mainly built for direct lung vaping. Its sub-ohm tank, mesh coils, and adjustable airflow give users an open DTL draw.

7. How do I refill the OBS Engine S Tank?

Open the top section of the tank and add e-liquid through the filling slot. Keep liquid away from the centre airflow tube, then close the tank securely before using the device.

8. How do I replace the OBS Engine coil?

Remove the tank base, take out the old coil, and fit a fresh compatible coil. Prime the new coil with e-liquid, refill the tank, and allow it time to soak.

9. Does the OBS Engine support Type-C charging?

Yes. The device has a USB Type-C charging port and supports up to 2A charging. A Type-C cable is supplied, giving you a simple charging option when required.

10. What is the maximum output of OBS Engine 100W?

The device offers a maximum 100W output and a full power range from 5W to 100W. This adjustable wattage lets users select suitable power for their installed mesh coil.

Why Choose Select Vape Club

FREE UK DELIVERY
When you spend £25
UNBEATABLE PRICES
Explore our more vape deals
SECURED PAYMENTS
We accept all major credit cards.
7 DAYS ONLINE SUPPORT
We available via whatsapp chat